Untitled Document

Wintergarden -Festoon blind system

FBC512 -Horizontal Festoon Blind System

The FBC512 has been developed to meet the requirement for very large horizontally drawn blind where the only supports available are at each end of an opening. It is therefore ideally suited to rectangular atria and similar openings in commercial buildings.

The blind is made in individual panels each one suspended between a pair of transverse support bars. The first fabric panel is attached to a lead hem bar which is connected by a pair of traction cables which are arranged to deploy and retract the blind using motorised cable drums mounted in a steel frame. The support bars hang from stasinless steel cables which span the opening between the cable roller frame on one side. When deployed, the pitch of the bars is controlled by a tape to produce the desired festoon pattern.

Technical Specification

Minimum width
Maximum width
Maximum draw
Maximum area
Maximum fabric weight
Supply
Tensile load per cable
Cable breaking load

2.3 m
6.0 m
18 m
100 m.sq
50 kg
230v 1.6 amps
400 kg
1300 kg